spacer image spacer image spacer image spacer image spacer image spacer image spacer image spacer image spacer image
spacer image Deep (scrub) cleaning

Step by step guide
spacer image
INSTALLATION
1.Sub floor preparation
spacer image
spacer image
spacer image
spacer image
spacer image
spacer image
spacer image
spacer image
spacer image
spacer image
spacer image
spacer image
CLEANING
   
Follow a monthly deep (scrub) cleaning routine.

1 Sweep or vacuum up dust, grit and other debris. Hand brush in corners and under chairs.

2 Spread cleaning agent to center aisles and side sections following maker's dilution guide. Avoid high-pressure cleaners,
spacer image except under strict operating instructions. Soak for 2-3 minutes. Scrub with a coarse nylon brush, such as a Flo-Pac or with machine.

3 Use a mop or wet vacuum cleaner to remove dirty water.

N.B. Use a twin compartment mop bucket or two buckets to
spacer image keep clean and dirty water separate as good rinsing of residual dirt and cleaners is essential to prevent discolouring and reduction of slip resistence

4 Thoroughly rinse the floor with hot or cold water.

5 Vacuum or mop up excess water and allow to dry.
 
©Altro Group 2002.
Altro Transflor™, Altro Transflor Gallium™, Altro Transflor Tungsten™, Altro Transflor Meta™, Altro Transflor Chroma™, Altro Transflor Paint Box™, Altromastic™ are trademarks of Altro Limited.